JVC GC-QX3 Digital Camera User Manual


 
EN 11
Front View
1 Flash............................................ pg. 33
Use the flash when shooting in dark
conditions.
2 Flash sensor
This sensor is needed for adjusting the
brightness when using the flash.
3 Self timer lamp ............................ pg. 32
Blinks when the self timer is running.
4 Zoom lens ................................... pg. 30
Point the lens towards the subject when
taking a picture. Because the lens is
extremely vulnerable to damage from
physical impacts, handle it very carefully.
Striking or dropping the lens can damage
the lens.
Top View
1 Exposure control button (+/–) ..... pg. 37
Press this button to check the brightness
setting and to change the brightness setting
for shooting photos.
2 FOCUS button ............................ pg. 34
Press this button to check the current focus
mode or to change the focus mode.
3 Iris button ................................... pg. 35
Press this button to check the current iris
mode or to change the iris mode.
4 LCD panel ................................... pg. 14
Indicates the current mode through text
and symbols.
5 Shutter button ............................. pg. 24
This button has two modes: press it half
way to focus on the subject; press it all of
the way to shoot a photo.
6 Flash button ................................ pg. 33
Press this button to change the flash mode.
7 Self timer button ......................... pg. 32
Press this button to change the time setting
for the self timer.
8 Macro button .............................. pg. 36
Press this button to set macro mode.
9 Directional button (r t w e) ..... pg. 23
Press this button to make various settings
and selections.
0 ZOOM lever ......................... pg. 27, 51
Use this for zoom shooting and to adjust
the brightness of the LCD screen.
! MODE switch........................ pg. 31, 36
Use this switch to change shooting and
playback modes.