Filter
Top Products
18 EN
GETTING STARTED
Charging the Battery
Charge the battery with the AC adapter (provided).
Power outlet
Battery BN-V37
Power cord
Power lamp
Charging lamp
Finish lamp
AC adapter
(AA-V37)
1
Connect the AC adapter's power cord to a
power outlet.
•The “Power” lamp lights.
2
Install the battery.
•The “Charging” lamp lights.
•Charging is complete when the “Charging”
lamp turns off and the “Finish” lamp lights.
3
Remove the battery.
NOTES:
●
Approximate charging time is 90 minutes for one
battery (BN-V37). (at a temperature from 10°C to
35°C or from 50°F to 95°F)
●
Charging is not possible if the DC cord is
connected to the AC adapter.
●
The battery is no longer usable, if the shooting
time is short with the battery fully charged.
Replace the battery with new one.
Remove the battery.
Approximate number of pictures that can be taken
with a fully charged battery (BN-V37)
Maximum number:
500 pictures (with the LCD screen turned off)
300 pictures (with the LCD screen turned on)
(when shooting every 5 seconds at normal tempera-
ture, without the flash and zooming)
Actual number:
65 pictures
(when shooting every 30 seconds at normal
temperature, with the flash, zooming, auto focus
and the LCD screen turned on)
NOTE:
●
Depending on the settings of the flash, zooming,
etc., the number of pictures that can be taken may
decrease.