Filter
Top Products
14 EN
LCD Panel
1 Indicator of initial settings having been
changed
This indicator is displayed if the initial
settings have been changed.
2 Mode display
Displays the current mode.
3 Remaining battery power
indicator
This bar graph gives a rough indication of
how much battery power is remaining.
4 Flash indicator ............................੬ pg. 33
This indicator is displayed if the flash
button has been pressed and a mode that
generates a flash (auto, forced on, or red-
eye prevention) has been set.
5 Timer mode indicator .................੬ pg. 32
This indicator is displayed if the Self timer
button has been pressed and the timer
mode has been set to either “1 second” or
“8 seconds”.
6 Macro mode indicator ................੬ pg. 36
This indicator is displayed if the macro
button has been pressed and the macro
mode has been turned on.
7 Remaining photos counter
This indicates how many photos can still
be taken.
CONTROLS, CONNECTORS AND INDICATORS (cont.)
1 2
3 4 5 6 7
Power Dial and Mode Display
The mode display appears on the LCD panel and screen, when the Power dial is set to certain position.
Refer to the chart below for each mode. Press the DSP button to display the image, when the Power dial is
set to “A”, “M” or “V”. Hold the Lock button down while turning the Power dial.
Power dial position LCD panel On-screen display Page
SET SET UP Displays the SET UP menu 16
B STILL PB Displays the playback image 31
OFF — — —
A CAM AUTO Displays the image 30
M MANUAL Displays the image 34
V VIDEO Displays the image 49