Filter
Top Products
12 EN
4
NEXT
M . W . B .
D . ZOOM
TELE MACRO
DATE TIME
TAPE LENGTH
4
RETURN
AUTO
ON
OFF
T30
4
NEXT
M . W . B .
D . ZOOM
TELE MACRO
DATE TIME
TAPE LENGTH
4
RETURN
AUTO
ON
OFF
T40
T20
T30
T40
EXIT
TAPE LENGTH
SP
T30
GETTING STARTED
(cont.)
Recording Mode Setting
Set depending on your preference.
1
SET RECORDING MODE
First set the Power Switch to “AUTO” or “PRO.”.
Press SP/EP for more than 1 second. “SP” (Standard
Play) provides higher picture and sound quality and is
better for dubbing, while “EP” (Extended Play) is
more economical, providing three times the record-
ing time.
NOTE:
If the recording mode is switched during recording, the
playback picture will be blurred at the switching point.
Menu Screen
Recording mode
indicator
Tape length indicator
TAPE LENGTH
Setting Menu
Display
Tape Length Setting
Set the tape length according to the length of the tape
used.
1
ACCESS MENU SCREEN
First set the Power Switch to “PRO.”. Press MENU.
2
SELECT FUNCTION
Rotate the Select Dial to move the highlight bar to
“TAPE LENGTH”, then press it. The TAPE LENGTH
Setting Menu appears.
3
SET TAPE LENGTH
Rotate the Select Dial to move the highlight bar to the
correct setting. T20=20 minutes of recording time,
T30=30 minutes, and T40=40 minutes (in SP).
•If you decide you want to return the tape length to
the previous setting, rotate the Select Dial to move
the highlight bar to “EXIT”.
4
CLOSE MENU SCREEN
Press the Select Dial. The Menu Screen reappears
with the highlight bar on “RETURN”. Press the Select
Dial again to close the Menu Screen.
NOTE:
The tape remaining time (
੬
pg. 17) displayed in the
viewfinder is correct only if the correct tape length has
been selected.
Select Dial Power Switch
MENU Button
SP/EP Recording Mode Button
Viewfinder