Filter
Top Products
42 EN
PLAYBACK
Features (cont.)
FEATURE:
Still Playback
PURPOSE:
To pause during playback.
OPERATION:
1) Press PLAY/PAUSE (
4
/6) during playback.
2) To resume normal playback, press PLAY/PAUSE
(
4
/6) again.
NOTE:
Noise bars appear and pictures may become
monochrome during Still Playback. This is normal.
FEATURE:
Shuttle Search
PURPOSE:
To allow high-speed search in either direction.
OPERATION:
1) Press FF (
3
) to search forward or press REW (
2
)
to reverse during playback.
2) To resume normal playback, press PLAY/PAUSE
(
4
/6).
NOTES:
●
During playback, press and hold REW (
2
) or
FF (
3
). The search continues as long as you hold
the button. Once you release it, normal playback
resumes.
●
Noise bars appear and pictures may become
monochrome or darken during Shuttle Search. This
is normal.
FEATURE:
Counter Memory Function
PURPOSE:
To make it easier to locate a specific tape segment.
OPERATION:
1) Press COUNTER R/M and hold for more than
1 second. The counter resets to “0:00:00”.
2) Press COUNTER R/M for less than 1 second. “M”
appears.
3) After recording or playback, press STOP (5), then
REW (
2
). The tape automatically stops at or close
to 0:00:00.
4) Press PLAY/PAUSE (
4
/6) to start playback.
NOTES:
●
The counter memory functions in the Fast-Forward
and Rewind modes.
●
To disable the Counter Memory Function, press
COUNTER R/M for less than 1 second so that “M”
disappears.
Power Switch
REW (
2
) Button
FF (
3
) Button
PLAY/PAUSE (
4
/6)
Button
STOP (5) Button
COUNTER R/M Button