Filter
Top Products
EN41
PLAYBACK
BRIGHT
BRIGHT
VOLUME
Power Zoom Lever
Speaker
Adjust the brightness of the LCD monitor
To brighten the image, turn the BRIGHT Dial towards “+”.
To darken the image, turn the Dial towards “–”.
NOTE:
The Bright Level Indicator is displayed under the Date/
Time Display when you play back images recorded in
Wide Mode (
੬
pg. 31).
Speaker Volume Control
You can adjust the speaker volume by pushing the Power
Zoom Lever.
1
ADJUST VOLUME
If you want to turn up the volume . . .
.... push the Power Zoom Lever towards “T”.
If you want to turn down the volume . . .
.... push the Power Zoom Lever towards “W”.
NOTE:
The Speaker Volume Indicator is displayed under the Date/
Time Display when you play back images recorded in
Wide Mode (
੬
pg. 31).
Tracking
This function can be used to eliminate noise bars that
appear on-screen during playback. Initial setting is Auto
Tracking. Manual Tracking is also available.
1
ACTIVATE MANUAL TRACKING
Press P.AE and EFFECT simultaneously. Then, press
P.AE or EFFECT as many times as necessary until the
noise bars disappear.
•To return to Auto Tracking, press P.AE and EFFECT
simultaneously. “AT” blinks. When Auto Tracking
finishes, the indication disappears.
NOTES:
●
When noise bars appear during playback, the
camcorder enters the Auto Tracking mode and “AT” is
displayed.
●
Manual Tracking may not work with tapes recorded on
other VCRs or camcorders.
Display
EFFECT Button
P.AE Button
BRIGHT Dial
PLAYBACK
Features