Filter
Top Products
EN
75
• The cassette is in the wrong
position.
• The battery’s charge is low.
• The memory card is in the wrong
position.
• The 5-Second mode is set to
“Anim.” in the Menu Screen.
• The Squeeze mode is selected.
• The light source or the subject does
not include white. Or there are
various different light sources
behind the subject.
• The Sepia or Monotone mode is
activated.
• Shooting was performed under
backlit conditions.
• The subject is too bright.
• 10X optical zoom is selected.
• The VIDEO/MEMORY Switch is set
to “MEMORY”.
• The Power Switch is set to “ ”.
• The Sepia or Monotone mode is
activated.
• The Sepia or Monotone mode of
Programme AE with special effects
is activated.
• The previously selected mode of
Programme AE with special effects
was changed after the last selected
scene for editing was registered.
•Set it in the right position
(੬ pg. 12).
•Install a fully charged battery
(੬ pg. 8, 9).
•Set it in the right position
(੬ pg. 13).
•Select “5S” in the Menu Screen
(੬ pg. 35).
•Disengage the Squeeze mode
(੬ pg. 30).
•Find a white subject and compose
your shot so that it also appears in
the frame (੬ pg. 20, 21).
•Turn off Sepia and Monotone
(੬ pg. 38, 39).
•Press the BACKLIGHT Button
(੬ pg. 40).
•Set “PROGRAM AE” to “SPOT-
LIGHT” in the Menu Screen
(੬ pg. 38).
•Set “ZOOM” to “40X” or “300X” in
the Menu Screen (੬ pg. 29).
•Set the VIDEO/MEMORY Switch to
“VIDEO” (੬ pg. 14, 22).
•Set the Power Switch to “ ”
(੬ pg. 36, 38).
•Turn off Sepia and Monotone
(੬ pg. 36, 38).
•Turn off Sepia or Monotone before
adding Dissolve to a scene
transition (੬ pg. 38, 68).
•Make sure you have selected the
mode of Programme AE with
special effects you want before
starting editing (੬ pg. 38, 68).
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
7 The cassette will not load
properly.
8 The memory card will not
load properly.
9 In the 5-Second mode,
recording ends before
5 seconds have elapsed.
0 Snapshot mode cannot be
used.
! The colour of Snapshot
looks strange.
@ The image taken using
Snapshot is too dark.
# The image taken using
Snapshot is too bright.
$ Digital Zoom does not work.
% Programme AE with special
effects and Fade/Wipe
Effects do not work.
^ The Black & White Fader
does not work.
& During R.A.Edit, the
Dissolve function does not
work.
CONTINUED ON NEXT PAGE