Filter
Top Products
VIDEO RECORDING & PLAYBACK
EN 27
VIDEO RECORDING & PLAYBACK
MasterPage: Basic_Right
The full-function remote control unit can operate
this camera from a distance as well as the basic
operations (playback, stop, pause, fast-forward
and rewind) of your VCR.
Installing the Battery
The remote control uses
one lithium battery
(CR2025).
1 Pull out the battery
holder by pushing the lock
tab.
2 Insert the battery in the
holder, and be sure to have the “+” mark visible.
3 Slide the holder back in until you hear a click.
Beam Effective Area
When using the remote
control, be sure to point it at
the remote sensor. The
transmitted beam’s
approximate effective
distance for indoor use is 5 m.
Use the remote control in
front of the camera facing
toward the lens.
NOTE:
The transmitted beam may not be effective or may
cause incorrect operation when the remote sensor
is directly exposed to sunlight or powerful lighting.
Buttons and Functions
A Infrared Beam Transmitting Window
● Transmits the beam signal.
B ZOOM (T/W) Buttons
Zoom In/Out (੬ pg. 23)
C Up Button
Rotate Button (clockwise) (੬ pg. 30)
D Skip Backward Button
E Left Button
F Back Button
G PLAYLIST Button (੬ pg. 42)
H START/STOP Button
I SNAPSHOT Button (੬ pg. 28)
J INFO Button (੬ pg. 38)
K Skip Forward Button
L PLAY/PAUSE Button
M Right Button
N Next Button
O Down Button
Rotate Button (counterclockwise) (੬ pg. 30)
P INDEX Button
Q DATE Button
Playback Using the Remote Control
1
1
2
Lock tab
Remote sensor
M5E3PAL.book Page 27 Tuesday, August 2, 2005 4:04 PM