JVC GZ-MG30EK Camcorder User Manual


 
STILL IMAGE RECORDING & PLAYBACK
EN 29
STILL IMAGE RECORDING & PLAYBACK
MasterPage: Basic_Right
1 Set the power switch to .
2 Set the MODE switch to .
The most recently shot still image is displayed.
To switch the medium to be played back, see
pages 21, 48 and 49.
3 Press to display the previous file. Press
to display the next file.
To turn on/off the date/time display
Set [DATE/TIME] to [ON], [AUTO] or [OFF].
(pg. 48, 49)
To turn on/off the on-screen display / To
check the file information (pg. 38)
Press INFO/ repeatedly.
NOTES:
Images shot and stored on the recording media
with another device may not be played back
correctly.
You can zoom in/out or rotate still images.
(pg. 30)
Slide Show
You can playback all the images stored in
recording media automatically.
1 Set the power switch to .
2 Set the MODE switch to .
A still image is displayed.
To switch the medium to be played back, see
pages 21, 48 and 49.
3 Press 49 to start the slide show.
If you press during the slide show, files are
displayed in descending order.
If you press during the slide show, files are
displayed in ascending order.
To end the slide show, press 49 again.
Index Screen of Still Image Files
You can view multiple files stored in a recording
medium at a time. This browsing capability
makes it easy to locate a particular file you want.
1 Slide the zoom lever
to W when a recorded
image is displayed.
The display switches to
the index screen.
2 Press / / / to
move the frame to the
desired file.
3 Press 49. The selected file is displayed.
Still Image Playback
Power Switch
Lock Button
49
Zoom Lever
INFO/
MODE
To display the next
image
To display the
previous image
Slide Show
Normal Playback
STILL IMAGE 7/53
M5E3PAL.book Page 29 Tuesday, August 2, 2005 4:04 PM