JVC GR-DV500 Camcorder User Manual


 
22 EN
Master Page: Left-Heading0
VIDEO PLAYBACK (cont.)
These are some basic types of connections. When
making the connections, refer also to your VCR and
TV instruction manuals.
* Not required for watching still images only.
** Connect when your TV/VCR has only A/V input
connectors.
*** Connect when your TV/VCR has S-VIDEO IN
and A/V input connectors. In this case, it is not
necessary to connect the yellow video cable.
**** When connecting the cable, open the cover.
1 Make sure all units are turned off.
2 Connect the camcorder to a TV or VCR as shown
in the illustration.
If using a VCR, go to step 3.
If not, go to step 4.
3 Connect the VCR output to the TV input,
referring to your VCR’s instruction manual.
4 Turn on the camcorder, the VCR and the TV.
5 Set the VCR to its AUX input mode, and set the
TV to its VIDEO mode.
To choose whether or not the following displays
appear on the connected TV…
Date/Time
Set “DATE/TIME” to “AUTO”, “ON” or “OFF”.
(pg. 31, 41)
Or, press DISPLAY on the remote control to turn
on/off the date indication.
Time Code
Set “TIME CODE” to “ON” or “OFF”.
(pg. 31, 41)
Indications other than date/time and time code
Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(pg. 31, 41)
NOTES:
It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
(pg. 11)
The S-Video cable is optional. Be sure to use the
YTU94146B S-Video cable. Consult the JVC
Service Center described on the sheet included in
the package for details on its availability. Make
sure to connect the end with a core filter to the
camcorder. The core filter reduces interference.
To monitor the picture and sound from the
camcorder without inserting a tape or memory
card, set the camcorder’s Power Switch to “A” or
M”, then set your TV to the appropriate input
mode.
Make sure you adjust the TV sound volume to its
minimum level to avoid a sudden burst of sound
when the camcorder is turned on.
If you have a TV or speakers that are not specially
shielded, do not place the speakers adjacent to the
TV as interference will occur in the camcorder
playback picture.
When a cable is connected to the AV or
headphone connector, sound cannot be heard
from the speaker.
Connections To A TV Or VCR
TV
VCR
Connector
Cover****
Connector
Cover****
A
A White to AUDIO L IN*
B Red to AUDIO R IN*
C Yellow to VIDEO IN**
D To S-VIDEO IN***
BCD
Audio/Video
cable
(provided)
To AV
To S
S-Video cable
(optional)
GR-DV900US_05Start-Video.fm Page 22 Monday, January 13, 2003 9:01 AM