Filter
Top Products
EN 33
Master Page: Right
WIPE–CORNER: Wipe in on a black screen
from the upper right to the lower left corner, or wipe
out from lower left to upper right, leaving a black
screen.
WIPE–WINDOW: The scene starts in the
center of a black screen and wipes in toward the
corners, or comes in from the corners, gradually
wiping out to the center.
WIPE–SLIDE: Wipe in from right to left, or
wipe out from left to right.
WIPE – DOOR: Wipe in as the two halves of a
black screen open to the left and right, revealing the
scene, or wipe out and the black screen reappears
from left and right to cover the scene.
WIPE–SCROLL: The scene wipes in from the
bottom to the top of a black screen, or wipes out
from top to bottom, leaving a black screen.
WIPE – SHUTTER: Wipe in from the center of
a black screen toward the top and bottom, or wipe
out from the top and bottom toward the center
leaving a black screen.
IMPORTANT:
Some modes of Program AE with special effects
cannot be used with certain Wipe/Fader effects.
(੬ pg. 32) If an unusable mode is selected, the
indicator of Wipe/Fader effects blinks or goes out.
1 Set the Power Switch to “M” while pressing down
the Lock Button located on the switch.
2 Open the LCD monitor fully, or pull out the
viewfinder fully.
3 Set “r” to the desired mode. (੬ pg. 31)
4 Press PROG.AE to activate the selected effect.
● The selected effect indicator appears.
To deactivate the selected effect…
Press PROG.AE again. The effect indicator
disappears.
NOTES:
● Program AE with special effects can be changed
during recording or during Record-Standby.
● Some modes of Program AE with special effects
cannot be used during Night-Alive.
PROGRAM AE
(Factory-preset: SHUTTER 1/60)
SHUTTER 1/60: The shutter speed is fixed at 1/
60th of a second. Black bands that usually appear
when shooting a TV screen become narrower.
SHUTTER 1/100: The shutter speed is fixed at
1/100th of a second. The flickering that occurs when
shooting under a fluorescent light or mercury-vapor
lamp is reduced.
SPORTS
(Variable Shutter Speed: 1/250 – 1/4000)
This setting allows fast-moving images to be
captured one frame at a time, for vivid, stable slow-
motion playback. The faster the shutter speed, the
darker the picture becomes. Use the shutter function
under good lighting conditions.
SNOW: Compensates for subjects that may
otherwise appear too dark when shooting in
extremely bright surroundings such as in the snow.
SPOTLIGHT: Compensates for subjects that
may otherwise appear too bright when shooting
under extremely strong direct lighting such as
spotlights.
NOTE:
“SPOTLIGHT” has the same effect as –3 with the
exposure control. (੬ pg. 46)
TWILIGHT: Makes evening scenes look more
natural. White Balance (੬ pg. 34, 47) is
automatically set to “ ”, but can be changed to
your desired setting. When Twilight is chosen, the
camcorder automatically adjusts the focus from
approx. 10 m (32 ft) to infinity. From less than 10 m
(32 ft), adjust the focus manually. The flash does not
fire in this mode.
Program AE With Special Effects
ADVANCED FEATURES
CONTINUED ON NEXT PAGE
GR-DV900US.book Page 33 Monday, January 6, 2003 4:21 PM