66 EN
Master Page: Left-Heading0
SYSTEM CONNECTIONS
[A] Using USB cable
It is possible to do the following things:
● Transfer still images stored on a memory card to a
PC.
● Transfer still/moving images recorded on a tape to
a PC.
● Capture still/moving images in real-time.
● Use this camcorder as a WebCam. (੬ pg. 67)
[B] Using DV cable
It is also possible to transfer still/moving images to a
PC with a DV connector by using the provided
software, software equipped with the PC or
commercially available software.
NOTES:
● Refer to “SOFTWARE INSTALLATION AND USB
CONNECTION GUIDE” for the installation of the
bundled software and drivers.
● The software operation manual is provided as PDF
file on the CD-ROM.
● It is recommended to use the AC Adapter as the
power supply instead of the battery pack.
(੬ pg. 11)
● Never connect the USB cable and the DV cable
simultaneously to the camcorder. Connect only
the cable you wish to use to the camcorder.
● When using a DV cable, be sure to use the
optional JVC VC-VDV206U or VC-VDV204U DV
cable depending on the type of DV connector (4
or 6 pins) on the PC.
● If the PC connected to the camcorder via the USB
cable is not powered, the camcorder does not
enter the USB mode.
● The date/time information cannot be captured into
the PC.
● Refer to the instruction manuals of the PC and
Software.
● The still images can also be transferred to a PC
with a DV connector-equipped capture board.
● The system may not work properly depending on
the PC or capture board you are using.
Connection To A Personal Computer
[A] Using USB cable
To USB
PC
PC with DV
connector
USB cable (provided)
To DV IN/OUT
[B] Using DV cable
To USB connector
To DV
connector
Core filter
Core filter
DV cable
(optional)
OR
“USB MODE” and/or “ACCESSING FILES”
appears on the LCD monitor while the PC is
accessing data in the camcorder or the camcorder
is transferring a file to the PC.
NEVER disconnect the USB cable while
“ACCESSING FILES” is displayed on the LCD
monitor since this can result in product damage.
GR-DV900US_07Advanced.fm Page 66 Friday, January 10, 2003 8:50 AM