Filter
Top Products
E-20
Precautions to Prevent Camera From Falling
● Special attention is required when mounting to the wall or ceiling. Get a contractor
to perform the work and avoid doing it on your own. Unit may fall off and cause
injuries or accidents.
● Mount the unit to a secure place using safety cable to prevent it from falling. To
mount, make use of the bracket fastening screw holes on the face without the cam-
era mounting bracket. (M2.6 x 4 mm) Pay attention also to the length of the cable.
● Strength of cable to prevent falling of unit shall be at least 10 times greater than the
total mass of the camera and lens.
Safety cable to Prevent
Falling of Equipment
Camera Head
4 mm
2. Preparation Before Shooting (continued)
Caution
1-1.5 mm