E-44
--- MENU ---
EXPOSURE . .
WH I T E B ALANCE. .
PROCESS . .
..
SYSTEM. .
FILE M
..
CAPTURE
EXIT
ANAGE
--- ---
LOAD FILE A
LOAD
FILE MA
NAGE
BACKPAGE
CANCEL
STORE
E
FILE A
STOR
CANCEL
RESET
T
FILE A
RESE
CANCEL
--- ---
LOAD FILE A
LOAD
FILE MA
NAGE
BACKPAGE
CANCEL
STORE
E
FILE A
STOR
CANCEL
RESET
T
FILE A
RESE
CANCEL
--- ---
LOAD FILE A
LOAD
FILE MA
NAGE
BACKPAGE
CANCEL
STORE
E
FILE A
STOR
EXECUTE
RESET
T
FILE A
RESE
CANCEL
The following can be performed on the “FILE MANAGE” screen.
● Saving menu settings in 3 types of files (A, B and C).
● Retrieving stored files (A, B and C).
● Resetting menu settings to factory settings.
“FILE MANAGE” Screen
“MENU” Screen
“FILE MANAGE” Screen
1. 2.
3.
1. 2.
4.
Blinking
Blinking
Blinking
5. Setting Via the Menu Screen (continued)
Ⅵ Display the “FILE MANAGE” screen
Make sure that the Switch 4 located at the side of this unit is
set to [OFF] (lower side).
1.
Press the [MENU] button for 1-2 seconds.
The “MENU” screen will be displayed.
2.
Use the [5/∞] buttons to select “FILE MANAGE..”, then press
the [SET] button.
The “FILE MANAGE” screen will be displayed.
Ⅵ Save the set value
1.
Use the [5/∞] buttons to select “STORE FILE”, then press
the [SET] button.
The set value displayed will start to blink.
2.
Use the [5/∞] buttons to select “A”,“B” and “C”, then press
the [SET] button.
3.
Use the [5/∞] buttons to select “STORE”, then press the [SET]
button.
“CANCEL” will start to blink.
4.
Use the [5/∞] buttons to select “EXECUTE”, followed by press-
ing the [SET] button to save the menu settings in the selected
file destination.
5.
Press the [MENU] button for 1-2 seconds.
The normal screen will be displayed.
