Filter
Top Products
E-21
English
LENS
DV
VIDEO OUT
TRGGER
REMORT
POWER
RGB
,
Y/C
,
SYNC
OUT
DC IN
SEE INSTRUCTION MANUAL
5 / BARS
∞/ AW
SETMENU
1234
3. Setting and Adjustment During Shooting
External Monitor Adjustment
1.
Connect the colour video monitor to the [VIDEO OUT] of this
unit.
Make sure that the Switch 4 located at the side of this unit is
set to [OFF] (lower side).
2.
Press the [BARS] button to output the colour bars signal (EBU-
compliant colour bars).
3.
With the colour bars displayed, turn [BLUE CHECK] at the
monitor to ON. Screen turns into a monochrome of blue and
colour bars appear as blue stripes.
4.
Turn the [CHROMA] adjustment knob on the monitor and
adjust colour bars 1 and 7 to the same brightness level.
5.
With [BLUE CHECK] in the ON mode, turn the [PHASE] ad-
justment knob on the monitor to adjust colour bars 3 and 5
to the same brightness level.
6.
If brightness of colour bars
1
and
7
vary upon [PHASE] ad-
justment, repeat chroma adjustment as in step
4.
.
7.
Turn [BLUE CHECK] at the monitor to OFF and return to the
normal screen (R. G. B are all displayed).
Display the built-in colour bars signal at the camera on the monitor to perform colour/contrast/brightness
adjustment.
2.
1.
3.~7.
[BARS]
12345678
Red
White
Yellow
Cyan
Green
Magenta
Blue
Black
Switch 4: [OFF]