Filter
Top Products
E17
Ⅵ Turning the power ON
Wait for 5 seconds or more after the power switch on the AA-P700 is set to ON before invok-
ing the [KY-LINK] application software.
Ⅵ Turning the power OFF
Wait for 5 seconds or more after the [KY-LINK] application software is closed before setting
the power switch on the AA-P700 to OFF.
CAUTION
• After the power switch has been turned OFF, wait at least 10 seconds before turning the power ON
again. Turning the power switch ON/OFF in rapid succession may result in malfunctions, such as
failure to boot, etc.
• When power is supplied from the computer, control of the motorized lens is not possible.
MEMO
If power is supplied from both the IEEE1394 connector and from the DC IN connector, the DC IN
connector will have priority.
CAUTION
In case of medical use
ቢ Make sure to use Earth cable. (Refer the Ilustration for connection.)
ባ Make sure to use OKI ELECTRIC CABLE (part No: 1394 N1 2.9M) for IEEE1394 connection.
ቤ Make sure to use the specified AC Adapter.
North American Market................. AA-P700MDU
UK Market ..................................... AA-P700EK
Other European Market ................ AA-P700EG