Filter
Top Products
E43
Synchronizing flash and trigger
To synchronize the flash with the input of an external trigger, use the [REMOTE] connector on
the rear.
Pin configurations of connectors ( ੬ page E9).
Ⅵ
When the shutter mode is other than “RANDOM” “EEI” ( ੬ page E28, Shutter item)
● In response to the trigger input, the KY-F75 outputs a flash signal for the CCD accumulation
period of the next frame.
● The image shot at the moment that the FLASH signal is outputted is output as the next frame.
● In the case of video output, output stops with shooting of this frame and the image on the PC’s
monitor will be in the FREEZE condition.
● How to cancel the FREEZE condition can be selected. ( ੬ page E42, [Freeze cancel] item)
● The trigger interval must be minimum 3 frames (405 msec) at a shutter speed of 1/7.5 s or
faster.
● When the FREEZE cancel mode is set to “MANUAL”, FLASH will not be output in response to
the trigger input for FREEZE cancellation.
5. Others
Trigger
VD
(Internal)
EXP
(CCD accumulation period)
FLASH
Video
output
Timing chart