Filter
Top Products
E42
System setting screen
Used to select the method for canceling the freeze image and decide whether or not a color bar
should be displayed as test pattern. It is also used for saving the set values of the setting screens
in the memory of the KY-F75.
For selecting the method for canceling the
freeze image.
For selecting display of the color bar.
For selecting the color bar level.
Save button:
Click this button to save
the values set for the
setting screens in the
memory of the KY-F75.
However, when KY-LINK
is started up, it recalls
and sets the camera to
the values valid when it
was closed down the
previous time. Conse-
quently, the settings
saved in the camera with
the Save button are
made invalid.
Contents
Sets the method for canceling the FREEZE when the
monitor screen is in FREEZE condition .
MANUAL : Cancelled by trigger input.
AUTO1s : Cancelled after 1 second.
AUTO3s : Cancelled after 3 seconds.
AUTO5s : Cancelled after 5 seconds.
OFF : Not cancelled.
*
When set to “AUTO” or “OFF”, the displayed screen can
be updated by trigger input during the FREEZE condition.
Selects whether or not a color bar should be displayed as
test pattern.
OFF : Color bar is not displayed. The normal video sig-
nal is shown.
BAR: Color bar is displayed.
Selects the level of the color bar signal.
255 :
Outputs a color bar signal in which the white level is 255.
213 :
Outputs a color bar signal in which the white level is 213.
Set Value
[MANUAL]
AUTO1s
AUTO3s
AUTO5s
OFF
[OFF]
BAR
[255]
213
Item
Freeze cancel
Test pattern
Pattern level
When “BAR”
is selected.
[ ] indicates the factory setting
4. Settings (continued)