JVC KY-F75 Digital Camera User Manual


 
E5
Features
The KY-F75 is a digital camera employing three 1/2 CCD with 1.45 million effective pixels.
Output of 1360 × 1024-pixel digital video signal possible.
Built-in DSP for real-time processing of the video signal that is output as a 7.5 frames-per-
second RGB digital signal enables real-time transfer to personal computer by means of
IEEE1394 host adapter.
Built-in IEEE1394 connector enables remote control from personal computer. (Supplied soft-
ware)
Employment of 1/2 C-mount optical system enables connection to various types of optical
devices.
Recording in the near-infrared region can be accomplished by replacing the optical filter (sepa-
rately sold).
(Please consult the nearest JVC Service Center or your dealer with regards to replacement of
the optical filter.)
1. Introduction
Accessories and attachments
INSTRUCTIONS
Clamp filter (2 pcs.)
For IEEE1394 cable and DC power cable
( page E14, E16)
Wire clamp (5 pcs.)
For clamping cables on the rear.
MEMO
To allow control of the camera and allow the camera image to be shown, the IEEE1394 host
adapter and the exclusive application software [KY-LINK] must be installed in the computer.
Use the separately sold KA-FW41U model as the IEEE1394 host adapter. The exclusive
application software [KY-LINK] is found on the supplied CD-ROM.
CD-ROM (1)
Exclusive application software [KY-LINK], etc.
*
See the Readme.txt file in the [ENG] folder
on the CD-ROM for details.
Earth cable (2m)