Filter
Top Products
30 EN
Master Page: Left-Heading0
_001EN_PDF_04M3D7S-ImageMixer.fm Page 30
CAPTURING VIDEO
When a camcorder is connected to the PC with a USB cable, the video from the camcorder can be recorded
on the PC’s hard drive instead of on tape or in a memory card (real-time capture).
1 Connect the camcorder to the PC with a USB cable.
● Refer to “Connections (Windows
®
)” (੬ pg. 9) or “Connections (Macintosh)” (੬ pg. 13) in the Software
Installation and USB Connection Guide.
2 Set the camcorder to the memory card recording mode.
The camcorder is now on.
“ ” appears on the camcorder’s LCD monitor.
● If “ ” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation
(Windows
®
)” (੬ pg. 5) and “Software Installation (Macintosh)” (੬ pg. 14) in the Software Installation
and USB Connection Guide.
NOTE:
The procedure is different when reading or writing a memory card.
3 Select [Start] – [Programs] – [PIXELA] –
[ImageMixer] – [ImageMixer With VCD
Ver.1.1].
● For Macintosh, double-click the
[ImageMixer] icon on the PC.
ImageMixer starts up.
4 Click the Input button.
The input mode screen appears.
Capturing video in real time
Input
CONTINUED ON NEXT PAGE