JVC LYT1147-001A Camcorder User Manual


 
Master Page: Right
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 12
—12—
Still images
Use an application that can handle the JPEG file format. To view a still image, double-click the still image file
(extension “.jpg”).
Video clips (Only for the camcorder equipped with E-Mail Clip Recording function)
Use the Windows Media™ Player (version 6.4 or later). You can download the Windows Media™ Player from
the Microsoft web site at:
http://www.microsoft.com/
If you cannot play back a video clip file (extension “.asf”) that you have opened with the Windows Media™
Player, connect to the Internet and then try opening the file. The software that is needed in order to play back
the file will be downloaded automatically, and then the file will be played back.
If the video clip plays but without the audio, install the G.726 decoder from the CD-ROM.
Before loading or unloading memory cards or turning off the PC, first disconnect the USB cable and turn off
the camcorder.
When using Windows
®
98/98SE
1
Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor
of the camcorder.
If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2 Double-click the [My Computer] icon on the desktop.
If the camcorder is connected to the PC correctly, the [Removable Disk] icon appears.
3 Right-click the [Removable Disk] icon in the [My Computer] window.
A menu appears.
4 Click [Eject] in the menu.
The [Removable Disk] icon disappears.
If the icon does not disappear, wait for a while, and then proceed to step 5.
5 Disconnect the USB cable.
If any message appears, click [OK].
6 Set the Power Switch on the camcorder to “OFF”.
The camcorder turns off.
When using Windows
®
2000/Me/XP
1
Confirm that the message [ACCESSING FILES] is not currently displayed on the LCD monitor
of the camcorder.
If the message [ACCESSING FILES] is currently displayed, wait until it disappears before proceeding.
2 Double-click the [Unplug or Eject Hardware] icon in the status
bar.
The [Unplug or Eject Hardware] or [Safely Remove Hardware] dialog
box appears.
Playing Back Files on the PC (Windows
®
)
Disconnecting the USB Cable (Windows
®
)
CONTINUED ON NEXT PAGE
_001EN_SHEET_M3D7S-Sheet_p8-16.fm Page 12 Wednesday, December 4, 2002 6:47 PM