Filter
Top Products
66 EN
Master Page: Left
Video and D.S.C. Playback
7. The LCD monitor or
viewfinder indications blink.
7. •Certain Wipe/Fader effects,
certain modes of Program AE
with special effects, “DIS”
and other functions that
cannot be used together are
selected at the same time.
7. •Re-read the sections covering
Wipe/Fader effects, Program
AE with special effects and
“DIS”. (੬ pg. 31 – 34, 36)
8. Digital Zoom does not work. 8. •10X optical zoom is selected.
•The VIDEO/MEMORY
Switch is set to “MEMORY”.
8. •Set “ZOOM” to “40X” or
“200X”. (੬ pg. 35)
•Set the VIDEO/MEMORY
Switch to “VIDEO”.
SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION
9. Play, Rewind and Fast-Forward
functions do not work.
9. •The Power Switch is set to
“A” or “M”.
•VIDEO/MEMORY Switch is
set to “MEMORY”.
9. •Set the Power Switch to
“P”. (੬ pg. 20)
•Set the VIDEO/MEMORY
Switch to “VIDEO”.
10. The tape is moving, but there is
no picture.
10. •Your TV has AV input
terminals, but is not set to its
VIDEO mode.
•The cassette holder cover is
open.
10. •Set the TV to the mode or
channel appropriate for
video playback. (੬ pg. 22)
•Close the cassette holder
cover. (੬ pg. 15)
11. Blocks of noise appear during
playback, or there is no
playback picture and the
screen becomes blue.
11.
—
11. •Clean the video heads with
an optional cleaning
cassette. (੬ pg. 73)
12. A memory card cannot be
played back.
12. •The Power Switch is set to
“A” or “M”.
•The VIDEO/MEMORY
Switch is set to “VIDEO”.
12. •Set the Power Switch to
“P”. (੬ pg. 24)
•Set the VIDEO/MEMORY
Switch to “MEMORY”.
TROUBLESHOOTING (cont.)
GR-DVP9Asia.book Page 66 Monday, February 10, 2003 1:12 PM