Filter
Top Products
25
Note:
● Make sure that the dome cover is firmly
fastened.
Otherwise, the humidity level may rise, which
may result in fogging and even falling of the
cover.
● Ensure that the fall prevention wire of the
dome cover is not caught in the space
between the dome cover and base. Failing to
do so may cause the dust-proof and water-
proof features to malfunction.
Mounting the base to the electrical box.
1.
Setting the switches (
A
Pg. 17)
2.Removing the camera unit from the base
(A Pg. 17)
3.Mounting the base to the electrical box
Mount the base to the electrical box by using the
2 mounting holes and 2 M4 screws.
Memo:
● M4 screws are not supplied with this product.
4.The following procedures are same as
normal mounting
●Cable Connection (A Pg. 19)
●Mounting the camera unit to the base
●(A Pg. 20)
●Adjusting Images (A Pg. 22)
●Mounting the inner dome (A Pg. 24)
●Mounting the dome cover (A Pg. 24)
Mounting the camera using
the electrical box
4 Inch square electrical box
M4 Screw
Base
TK-C215VP4_JP.book Page 25 Wednesday, September 20, 2006 5:48 PM