Filter
Top Products
55
Details Page
This page is for performing detailed network setting.
This page can be used during access using AadminB.
● Press the [OK] button to enable the new settings upon changing.
● If the [OK] button is pressed upon entering an invalid value, a warning message will appear and the
entry will be denied. Press the [Cancel] button to restore the invalid entry to the current value.
B
C
D
A
E
A TOS(DS field) For setting the TOS value of IP packets in which JPEG is stored.
The upper 6 bits out of 8 bits in TOS value belong to DSCP.
This upper 6 bits can be set. The lower 2 bits are A0B. For example, when
A255B is entered, the lower 2 bits are converted to A0B, so A252Bis set.
TOS values are used in networks that support priority control. By setting
priority control to the network switch, routing can be done using packet with
bigger TOS value as first priority.
B TTL Unicast For setting the TTL value of JPEG packets that are to be sent via TCP.
C TTL Multicast For setting the TTL value of JPEG packets that are to be sent via multicast.
D MTU For setting the maximum packet size for storing JPEG.
[Setting range: 1280 - 1500]
E Negotiation For setting the negotiation of the network.
When a value other than AAutoB is selected, do not set the network device to
be connected to AAutoB. Ensure that it is set to the same value as VN-
C215V4U.
VN-C215_EN.book Page 55 Monday, November 27, 2006 9:46 AM