Filter
Top Products
78
Operation
Built-in Viewer Settings (continued)
Memo：
● The settings of the built-in viewer are stored
in the Cookie file.
Memo：
Searching and deleting cookie files
● Enter the [Tools]-[Internet Options...]-
[General] of the Internet Explorer and press
the [Settings] button under [Temporary
Internet Files]. A new [Settings] will appear.
Press the [View Files...] button in this
window. The [Temporary Internet Files]
window opens up and a list of files will be
displayed. The file named Acgi-bin/B in this
list is the Cookie for the built-in viewer.
● Deleting this file also deletes the viewer
settings. The viewer will start up in an
initialized condition during the next launch.
Operation of Built-in Viewer
(continued)
J Alarm (TCP
Notification)
When AOnB is selected, the [Alarm] button blinks when an alarm
notification is sent from VN-C215V4U via TCP.
In order to use this feature, it is necessary to set the alarm action for
sending the notification to VN-C215V4U via TCP. Set the destination of
the alarm action to the IP address of the computer that is used to operate
the built-in viewer, and set the [TCP/UDP Port Number] item to the same
number as the K[Alarm Port Number] item below. Setting in the [TCP/
UDP Data] is ignored by built-in viewer.(A Pg. 46)
K Alarm Port Number For setting the port number for receiving the alarm notification from VN-
C215V4U via TCP.
L Auto Alarm Clear For selecting the time out to turn off the blinking of [Alarm] button
automatically.
M Cancel For canceling the changed settings and closing the setting screen.
N OK For saving the changed settings.
Click [OK] to enable the new settings and restart the built-in viewer after
closing the setting window.
This setting screen is used to set the built-in
viewer as a software on the computer, and not
applied as settings to the VN-C215V4U unit.
When settings are changed, press the [OK]
button to exit and restart the viewer.
VN-C215_EN.book Page 78 Monday, November 27, 2006 9:46 AM