Filter
Top Products
17
Changing the display size and inverting the image
Adjusting the image quality
For details on the image sensor settings, see the following page.
Select the image size.
The displayed image can also be inverted.
Used to set the unit to the factory settings.
Click OK to enable settings.
To enable settings after making changes,
click OK.
Select the [Display] menu.
Select [Image Quality] from the [Setup]
menu.
The compression ratio is inversely
proportional to the image quality.
The number of frames of the image
displayed per second is proportional to
the compression ratio.
Compression ratio (Low)-(Mid)-(High)
Image quality (High)-(Mid)-(Low)
Number of frames (Min)-(Mid)-(Max)