Filter
Top Products
73
A AUTO
F
UNCTION
Start : Starts the Auto Patrol operation.
Stop : Stops the Auto Patrol operation that is currently running.
B Preset
Position
For selecting a Preset Position, or move to the selected Position if that Position
has already been registered.
[Set values : HOME , 1 to 19]
C Pan/Tilt/
Zoom
Ⅵ Pan/Tilt operation
Click the arrow buttons to move the display area in the direction indicated by
the arrow. Release the button to stop moving the area.
Click the
[H] button to move to the home position.
Ⅵ
Zoom operation
Use this function to perform digital zoom on the display area.
[ + ] : Zooms toward the tele end, and display of the object is enlarged.
[ - ] : Zooms toward the wide end, and display of the object becomes
smaller.
Ⅵ Ratio to Full Area
Shows current ratio to full area.
Memo:
● You can restrict the magnification of the object using the [+] button by
altering the [Zoom Limit] settings.(A Page 38)
D Speed For configuring the operation speed settings.
Pan/Tilt : For configuring the operation speed settings of the APan/TiltB control
button. The larger the value, the higher the operation speed.
[Set values : 1 to 8]
Zoom : For configuring the operation speed settings of the AZoomB control
button. The larger the value, the higher the operation speed.
[Set values : 1 to 4]