Filter
Top Products
KODAK 305 Photo Printer
10
2. Option setting dialog
<Fig.25 Option setting dialog (Windows XP)>
1) Sharpness
none / -3 / -2 / -1 / 0 / 1 / 2 / 3
Level of outline correction is changed.
none :Not perform the outline correction.
-3 to 3 :The value is smaller, the outline becomes softer.
The value is larger, the outline becomes sharper.
2) Print fi nish
Matte fi nish is set.
Note: Matte is only recommended for an even number of 10x15 prints.
*Printing an uneven number of prints may lead to lower number of prints produced per ribbon kit.
3) Color correction
The tone of light colors can be changed.
R :-200 - +200
As the value is smaller, the red tone is weakened.
As the value is larger, the red tone is intensifi ed.
G :-200 - +200
As the value is smaller, the green tone is weakened.
As the value is larger, the green tone is intensifi ed.
B :-200 - +200
As the value is smaller, the blue tone is weakened.
As the value is larger, the blue tone is intensifi ed.
4) Color matching
Color matching is carried out according to the ICC profi le set in the “Color control” tab.
When the ICC profi le is not set in the “Color control” tab, set the “Color matching” to OFF because
the color matching is not carried out in this case.
For ICC profi le, see “2. Making the ICC profi le” in the “Operating directions for customer’s purpose.”
5) Color conversion
none / Table1
none :Color conversion is not performed.
Table1 :Color conversion is performed.
When the color matching is set to ON, color conversion is not available.
6) Defaults
All the settings in Option dialog are reset to the defaults.