Filter
Top Products
55
Chapter 8
Docking the Camera
When you are ready to transfer your pictures from the camera to the computer,
or charge the Battery Pack, place the camera in the Camera Dock.
1 Turn off the camera.
2 On the camera bottom, slide the connector
cover open.
3 Place the camera in the Camera Dock and
push down to seat the connectors.
The Power/Transfer light glows
green when the camera is properly
seated.
The camera is now powered by the
Camera Dock instead of the camera
batteries.
NOTE: If the KODAK EASYSHARE Ni-MH Rechargeable Battery Pack is in the
camera, the Camera Dock immediately begins charging (see page 56).
Connector cover
Power/Transfer light
Connector