Filter
Top Products
77
8
Camera
Problem Cause Solution
Pictures remaining number
does not decrease after taking
a picture.
The image Resolution
and Quality settings
does not take up
sufficient space to
decrease the picture
remaining number.
The camera is
operating normally.
Continue taking
pictures.
Picture is not clear. The lens is dirty. Clean the lens. See
page 89.
Subject too close
when taking picture.
Stand at least .82 ft
(.25m) in wide angle,
1.6 ft (.5m) in
telephoto.
Subject or the camera
moved while the
picture was taken.
Hold camera steady
until the picture is
taken.
The subject is too far
away for the flash to
be effective.
Move so the subject is
less than 13 ft
(4.0 m) away.
The Sharpness setting
may be set incorrectly.
Change the Sharpness
setting to Standard.
See page 30.
Picture is tinted green, blue, or
red-orange.
The White Balance
setting is set
incorrectly.
Change the White
Balance setting to
Auto. See page 27.
Check the White
Balance default
setting. See page 51.