Filter
Top Products
Caring for Your DCS 645
112
Contents
Back
Next
Index
✔
Attach the body cap over the exposed IR or
anti-aliasing filter to protect it from damage.
✔ Wrap in a clean, soft cloth and place in a
well-ventilated, cool, dry, dust-free place.
✔ Keep out of direct sunlight and away from
“hot spots” such as the trunk of a car.
✔ Avoid places where chemical agents such
as moth balls are used.
✔ In extreme humidity, use a desiccant.
✔ If the DCS 645 has been stored for a long
period of time, carefully check the operation
or have it thoroughly tested at an
authorized service center.
☛ After storing the DCS 645 for several days,
you may need to set the date and time
(page 68).
✔ When the DCS 645 is removed from the
camera body, attach the body cap. Place
the slot at the bottom of the DCS 645 in the
locating post on the body cap, then press
the body cap in place.