Filter
Top Products
Capturing and Processing Images
83
Contents
Back
Next
Index
Capturing and Processing Images
Overview
This section describes operations specific to the
DCS 645.
Capture images using the Shutter Release
button on the camera body. Refer to the User’s
Manual for your CONTAX 645, MAMIYA 645AF,
or MAMIYA 645AFD.
Refer also to the list of features that are not
supported (page 119) when the DCS 645 is used
with the CONTAX 645, MAMIYA 645AF, or
MAMIYA 645AF camera body.
MAMIYA 645AF only: You must half-press the
Shutter Release button for 1/4 second before
capturing an image. If you press the button fully
to the release position, the shutter will not
actuate. You must then fully release the Shutter
Release button and perform a half-press for 1/4
second.
To capture sequential images using a MAMIYA
645AF camera body, you must completely lift
your finger off the camera body’s Shutter
Release button after each image capture.