Filter
Top Products
Capture Workflows
19
Contents
Back
Next
Index
Capturing Images
Using the DCS 645
✔ Select the desired folder to store captured
images.
✔ Enable processing if you want images
processed to JPEG or TIFF RGB on-
camera (page 94). Change processing
settings (page 95), if needed. (It is
recommended that you save the original
.DCR files. Consider the .DCR file as your
“digital negative.”)
Occasional Verification
Conditions such as lighting and composition vary
between locations (for example, between the
bride’s home, the church, and the reception site).
To assure the highest image quality, evaluate
test images (page 18) at each location and make
necessary adjustments.
You may also want your customer to review
images while still on location.
View images using one of the following:
✔ Image LCD using one of several Display
modes (page 99)
✔ Connected video monitor (page 121) (The
Image LCD is disabled when this is in use)
✔ Remove the CF card from the DCS 645 and
plug it into a laptop computer. View the
images using the included software.