Filter
Top Products
54
Chapter 8
In Review mode,
you do not see a
picture on the LCD
or do not see the
picture you
expected.
The camera may not be
accessing the correct
storage location.
Check the picture storage
location setting (page 13).
Picture is too dark. Flash is not on or did not
function.
Turn on the flash (page 18).
The subject is too far
away for the flash to have
an effect.
Move so there is no more
than 7.5 ft (2.3 m) between
the camera and the subject.
The subject is in front of
a bright light (backlit).
Change your position so the
light is not behind the
subject.
Camera does not
turn on.
Battery is not properly
installed.
Remove and reinstall the
batteries (page 3).
Battery is not charged. Replace or recharge the
batteries (page 3).
Camera freezes up
when a Picture
Card is inserted or
removed.
Camera detects an error
when the Picture Card
was inserted or
removed.
Turn the camera off, then
back on. Make sure the
camera is turned off before
inserting or removing a
Picture Card.
Camera
Problem Cause Solution