Filter
Top Products
Taking pictures and videos
10
Using the camera screen as a viewfinder
NOTE: To prolong battery life, use the Liveview feature sparingly.
1 Turn the Mode dial to any Still mode.
2 Press the OK button to turn on the camera
screen.
3 Frame your subject in the camera screen.
4 Press the Shutter button halfway and hold
to set the exposure and focus.
When the framing marks turn red, focus is
accomplished.
5 Press the rest of the way down to take the
picture.
NOTE: Framing marks appear only when the camera screen is on.
Framing marks do not appear in Landscape or Video mode.
■ To turn off the camera screen, press the OK button.
To make the camera screen turn on whenever the camera is on, see Liveview,
page 18.
Reviewing the picture or video just taken
After you take a picture or video, it appears on the camera screen for
approximately 5 seconds. While it is displayed, you can:
■ Review: If you take no action, the picture/video is saved.
■ Play (video): Press the OK button to play the video.
■ Share: Press the Share button to tag a picture/video for email, or as a
Favorite, or to tag a picture for print (see page 29).
■ Delete: Press the Delete button while the picture/video and are
displayed.
NOTE: Only the final picture of a burst series (see page 14) is displayed. If you select Delete, all
pictures in the burst series are deleted. To delete selectively, do so in Review (see
page 21).
OK button
Framing marks