Filter
Top Products
www.kodak.com/go/support 7
2 Taking pictures and videos
Taking a picture
1 Turn the Mode dial to Auto . (See page 10 for other mode
descriptions.)
The camera screen displays the mode name and description. To interrupt the
description, press any button. To redisplay the description, press the OK button.
2 Use the camera screen as a viewfinder, or
press the Display/Info button to turn off the
camera screen and use the viewfinder to
frame your subject.
3 Press the Shutter button halfway to set the
exposure and focus.
4 When the ready light turns green, continue
pressing the Shutter button completely
down to take the picture.
If the ready light is steady or blinking red, release
your finger, recompose the scene, and return to
Step 3.
When the ready light blinks green, the picture is
being saved; you can still take pictures.
NOTE: If you want the camera screen be off when you turn on the camera, see Liveview (Auto),
page 23.
Using the diopter dial
You can adjust the viewfinder sharpness to your preference.
1 Look through the viewfinder.
2 Using your left thumb, turn the diopter dial
until the viewfinder image is sharp.
Display/ buttonInfo
Diopter
dial