Filter
Top Products
Troubleshooting
www.kodak.com/go/support
45
Stored pictures are
corrupted.
■ Retake pictures. Do not remove card while the camera is accessing it.
Keep rechargeable batteries charged.
■ Transfer pictures to the computer (see page 40), then format the card
in the camera (see page 30).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
In Review mode,
you do not see a
picture (or the
expected picture)
on the LCD screen.
■ Check the image storage location setting (see page 28).
In Review mode, a
blue or black
screen is displayed
instead of a
picture.
■ Transfer the picture to the computer (see page 40), then format the
card in the camera (see page 30).
Caution: Formatting a card deletes all pictures and videos,
including protected files.
Shutter button
does not work.
■ Turn on the camera (see page 3).
■ Transfer pictures to the computer (see page 40), delete pictures from
the camera (see page 16), switch image storage locations (see
page 28), or insert a card with available memory (see page 4).
Picture is too light.
■ Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■ Decrease Exposure Compensation (see page 31).
Picture is not clear.
■ Clean the lens (see page 54).
■ Make sure your camera is not in Close-up mode.
■ Move so there is at least 2 ft (0.6 m) between the camera and the
subject.
■ Place the camera on a flat, steady surface or use a tripod.
If... Try one or more of the following