Filter
Top Products
Getting started
www.kodak.com/go/support
7
Changing your frame orientation
Your frame is set up to display pictures in landscape orientation. You can turn the
stand to change it to portrait but you must also change the setting.
Change the stand position:
■ R
emove the stand, turn it 90
°
, and replace as shown
(see
page 1).
Change the setting:
1 Tap (Home)
→ (Settings).
2 Slide to highlight (Viewing options), then tap OK.
3 Slide to highlight Frame orientation, then tap OK.
4 Slide to highlight Portrait, then tap OK.
5 Tap to exit.
Mounting your frame on the wall
Use 3 mm (1/8 inch), or larger, wall-anchoring hardware (not included) to anchor your
frame securely to your wall.
To change to portrait , turn
your frame 90° and use the
wall mounting holes at the top.
Wall mounting holes
(on back of frame)
Secure power cable
with attached clip