Filter
Top Products
22 www.kodak.com/go/support
Doing more
Upgrading your firmware
Firmware is the software that runs on your frame. To check for the latest version, visit
www.kodak.com/go/digitalframedownloads.
Download the firmware to your computer, then upgrade your frame:
1 On your computer, go to www.kodak.com/go/digitalframedownloads.
2 Follow the screen directions to download the frame firmware to your computer.
3 Copy the IMG file to the root directory of a memory card or USB flash drive, then
insert into the frame.
The frame recognizes the upgrade file on the inserted device and makes the Firmware
Upgrade option available in the Settings menus.
4 Tap (Home), then (Settings).
5 Highlight Firmware Upgrade, then tap OK to begin the upgrade.
IMPORTANT:
Do not turn off the frame or remove the memory card or USB flash drive
during the upgrade!
When the upgrade is complete, your frame automatically restarts. If it doesn’t, press the
power button to turn the frame off, wait a few seconds, then press it again to turn the
frame back on.