Filter
Top Products
7
OPEN
LOADING THE FILM
You can load film into the camera with the
camera ON or OFF.
1. Turn the camera
upside down and
move the FILM-DOOR
SWITCH (17) to open
the FILM DOOR (15).
• The safety
interlocked film door will open only
when the film chamber is empty or the
film in the camera is completely
rewound into the film cassette.
2. Insert the
film cassette
completely into the
FILM CHAMBER (16).
• Make sure the
Film Status
Indicator (FSI) on
the film cassette
is at ● (#1 position) for a new cassette.
• Do not force the film cassette into
the film chamber.
Battery tips
• Remember to keep a spare battery with
you at all times.
• Read and follow all warnings and
instructions supplied by the battery
manufacturer.
• Keep batteries away from children.
• Do not try to take apart, recharge or short
circuit the battery, or subject it to high
temperature or fire.
• Store batteries in their original packaging
prior to use.
Power shut-off
To save battery power, the camera will
automatically go into a sleep mode if it is not
operated for more than approximately 3
minutes. You can press any of the control
buttons to awaken the camera.