Filter
Top Products
www.kodak.com/go/support 9
3 Advanced features
Using the camera under water
The camera does not float. Secure it to your wrist with the strap (see a floating
accessory strap at www.kodak.com/go/accessories). To keep the camera waterproof,
tightly close and latch all doors. Do not open doors in water or when hands are
wet. Waterproof integrity may be compromised if the camera is dropped. For more
information, see page 18.
For the best focus and color balance under water:
1 Press the Settings button , then to choose Underwater Correction.
2 Press OK, then to select ON.
3 Press OK.
4 Press the Mode button to take videos/pictures.
5 Verify that your subject is within the underwater focus range (0.7 m [2.3 ft] to
infinity).
IMPORTANT:
Verify that all doors are tightly closed. This camera is waterproof to a depth
of 3 meters (9.8 feet).
After using the camera in water
■ When finished using under water, go to Step 1 and turn off Underwater
Correction.
■ Wipe off water or debris. If the camera was used in chemically treated water or
saltwater, rinse it in fresh water, then use a soft towel to dry it.
■ If water has entered the camera, remove the card. Allow the camera to air-dry for
at least 24 hours before using.