Filter
Top Products
EN-34
Auto Exposure Bracketing (AEB)
In this mode, the camera automatically changes the exposure within a set range to take three shots after
you press the shutter button once. AEB settings can be combined with exposure compensation settings
to extend the adjustment range.
1. Rotate the mode dial to
, P , , , or and turn your
camera on by pressing the ON/OFF button.
2. Press the MENU button , then use
to select the [FUNCTION]
menu.
3. Use T to select [CAPTURE MODE], then press the
button.
4. Use S or T to select [AEB], then press the
button.
5. To exit from the menu, press the MENU button.
The
indicator is displayed on the monitor screen.
6. Press the shutter button to shoot.
In this mode, the flash and the self-timer (10+2) features will be disabled.
CAPTURE MODE
BURST
SINGLE
X1
AEB
3 / 3
PICTURE FUNCTION
2 / 3
AUTO
EN-35
Selecting the Metering Mode
You can select the metering mode that sets which part of the subject to measure to determine the
exposure.
1. Rotate the mode dial to P ,
, , or and turn your
camera on by pressing the ON/OFF button.
2. Press the MENU button, then use
to select the [FUNCTION]
menu.
3. Use T to select [METERING], then press the
button.
4. Use S or T to select the desired metering mode, then press the
button.
[
AVERAGE]: Averages the light metered from the entire
frame, but gives greater weight to the subject matter at the
center.
[
SPOT]: Meters the area within the spot automatic
exposure point frame at the center of the LCD monitor.
5. To exit from the menu, press the MENU button.
6. Compose your subject within the focus frame.
7. Press the shutter button to capture the image.
PICTURE FUNCTION
3 / 3
X1
AUTO
METERING
SPOT
2 / 2
AVERAGE