Filter
Top Products
EN-36
PLAYBACK MODE - THE BASICS
Viewing Images
You can display the still images you have just captured at a time.
1. Press the ON/OFF button to turn on the camera.
2. Press the
button.
The last recorded image appears on the LCD monitor.
3. Use
or to select the desired images.
To view the previous image, press
.
To view the next image, press
.
The playback information displayed on the LCD monitor will disappear after seconds of time.
If there is no image stored in the internal memory or on the memory card. [NO IMAGE] message will appear on the
monitor.
SD
100-0001
SIZE
EV.
01. 04. '04
1280X960
+1.7
05:22
1
EN-37
Magnifying Images
While reviewing your images, you may enlarge a selected portion of an image. This magnification allows
you to view fine details. The zoom factor displayed on the screen shows the current magnification ratio.
1. Press the
button.
The last recorded image appears on the LCD monitor.
To view the previous image, press
.
To view the next image, press
.
2. Adjust the zoom ration by using the Zoom W / T button.
To enlarge the selected image, press the T button.
To return to the normal image, press the W button.
The magnification factor is displayed on the LCD monitor.
3. To view different portion of the images, press S / T /
/ to
adjust the display area.
The magnification factors range from 1x to 4x (within 7 stages: 1.0x, 1.5x, 2.0x, 2.5x, 3.0x, 3.5x and 4.0x).
T
T
T
T
2.0X