Filter
Top Products
When setting up the camera, make sure the subject will
fall within the focus frames. Focus lock cannot be used
with the IR remote control. Focus area selection (p. 52)
and manual focus (p. 65) can be used.
Point the emitter window of the remote control unit toward
the camera and press the release button or the delay but-
ton to take the picture.
43
The IR Remote Control RC-3 allows remote camera operation up to 5m (16 ft.) away. The remote
control unit can also be used in movie and audio recording (p. 79). The remote control may not oper-
ate with backlit subjects or under fluorescent light.
Place the camera on a tripod, and set the drive mode to self-timer / remote control
(p. 38, 56). Arrange the camera and subject to compose the picture.
Remote control (sold separately)
1
When the release button is pressed, the self-timer lamp on the
front of the camera (1) will blink once before the picture is taken.
When the delay button is pressed, the self-timer lamp will blink
for two seconds before the picture is taken.
Emitter window
Delay button
Release button