Filter
Top Products
94
P
LAYBACK MODE - ADVANCED OPERATION
Viewing images on a television
It is possible to view camera images on your television. The camera has a video-out terminal to make
the connection using the supplied AV cable. The camera is compatible with the NTSC and PAL stan-
dards. The video-output setting can be checked and set in the custom 2 section of the setup menu
(p. 82).
2
3
1. Turn off the television and the camera.
2. Insert the mini-plug end of the AV cable into the camera’s AV-
out terminal.
3. Plug the other end of the AV cable into the video and audio
input terminals on the television. The yellow plug is for the
video output. The white plug is for the monaural audio output.
4. Turn the television on.
5. Change the television to the video channel.
6. Turn the camera’s mode dial to the playback position. The
camera’s monitors will not activate when the camera is
attached to a television.The playback-mode display will be
visible on the television screen.
7. View images as described in the playback section.