Filter
Top Products
59
The photographer selects the shutter speed and the camera sets the
appropriate aperture to ensure correct exposure. When shutter priority is
selected, the shutter speed on the monitor turns blue and a double arrow
icon appears next to it. If the LCD monitor is turned off, the shutter speed
is fixed at the last setting and cannot be changed.The flash mode is set
to flash cancel. Fill-flash and fill-flash with red-eye reduction can be select-
ed (p. 32).
Shutter priority - S
Because the maximum aperture is not the same at the wide-angle and telephoto position, as the lens
is zoomed, the aperture will automatically shift. If the aperture value is beyond the shutter-speed
range, the shutter-speed display will turn red on the monitor.
1
Use the left/right keys of the
controller (1) to set the shutter
speed. Press the shutter-
release button to activate the
exposure system; the corre-
sponding aperture will be dis-
played on the monitor.
The shutter speed can be set between 1/1000 and 15 seconds. If the shutter speed is beyond the
aperture range, the aperture display will turn red on the monitor.