Filter
Top Products
1 2 3
4
19
Slide the card-slot door release down to open the card-slot door (1).
To eject a CompactFlash card, press the card-eject lever (2).The card can now be pulled out. Take
care when removing the card as it becomes hot with use.
Insert the memory card into the card slot until the card-eject lever pops out (3). Insert the card so the
face is toward the front of the camera. Always push the card in straight, never at an angle. Never
force the card. If the card does not fit, check that it is oriented correctly.
Close the card-slot door (4).
A card used in another camera may have to be formatted before being used. A card is formatted in
the basic section of the setup menu (p. 84); this operation permanently erases all data on the card. If
the unable-to-use-card message appears, the card is not compatible with the camera and cannot be
formatted.
Always turn off the camera and confirm the access lamp is
not lit before inserting or removing a CompactFlash card,
otherwise the card may be damaged, and data lost.