Filter
Top Products
95
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert
it into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver
software is required for other Windows or Macintosh operating systems.
Before connecting the camera to the
computer, place the DiMAGE Viewer CD-
ROM in the CD-ROM drive. The DiMAGE
installer menu should automatically
activate. To automatically install the
Windows 98 USB driver, click on the
starting-up-the-USB-device-driver-installer
button. A window will appear to confirm
that the driver should be installed; click
“Yes” to continue.
Automatic Installation
CONNECTING TO WINDOWS 98 AND 98 SECOND EDITION
When the driver has been successfully
installed, a window will appear. Click “OK.”
Restart the computer and connect the
camera (p. 93) to complete the operation.