Konica Minolta DYNAX40M Film Camera User Manual


 
50 A
DVANCED OPERATION
To make more than two exposures, press the function button and
turn the control dial counterclockwise to stop “ME” blinking after the
initial exposure. An unlimited number of exposures can be made by
repeating this procedure.
The camera meter indicates the required exposure for a single
picture. Depending on the scene, the exposure may have to be
compensated. The built-in flash can be used, but overexposure
could result.
ME will blink on the data panel after the
initial exposure to indicate the next exposure
will be the final one. Press the shutter-
release button to take the second exposure
and advance the film. The multiple-exposure
mode is canceled after the last exposure.
1
2
3
Turn the function dial to the
exposure bracketing / multiple
exposure position (1).
While pressing the function
button (2), turn the control dial
(3) until “ME” is displayed in the
frame counter. Release the
function button. The first
exposure can be taken.
MULTIPLE EXPOSURE NOTES