Konica Minolta DYNAX40M Film Camera User Manual


 
55
Lens shadowing occurs when the lens or lens hood blocks part of
the output from the built-in flash. Lens shadowing appears as a
semi-circular shadow at the bottom (horizontal pictures) or side
(vertical pictures) of the image. Remove the lens hood before using
the built-in flash.
Lens shadowing may occur with the following lenses at the shorter
focal lengths:
AF Zoom 28-70mm f/2.8G
AF Zoom 17-35mm f/3.5G
AF Zoom 28-135mm f/4.0-4.5
AF Zoom 28-85mm f/3.5-4.5
The built-in flash can not be used with the following lenses:
AF 300mm f/2.8 Apo G(HS)
AF 600mm f/4.0 Apo G(HS)
AF 300mm f/2.8 Apo G(D)SSM
Do not use the built-in or accessory flash when using a filter with a
filter factor greater than 0, a close-up lens, or the focus-range limiter
or macro release on certain lenses. This will result in an incorrect
exposure.
A lens hood improves image quality by
reducing flare, non-image forming light.
Slide the lens hood onto the bayonet
mount at the end of the lens. Turn the
hood clockwise until it clicks into place.
The hood can be reverse mounted for
storage. The lens cap can be attached
with the hood mounted.